BIM Coordination Services
Get detailed BIM designs with the detection of clashes among various subdivisions and enhance the collaboration during the installation of multiple components. Let’s connect to ensure cost reduction and enhance the project’s overall efficiency.
Why are BIM Clash Detection Services Important?
Planning a building construction is not a single task. Instead, it’s a combination of various subtasks such as plumbing, mechanical, electrical, structural, architectural and interior work. Sketches of all these subdivisions are made at the planning phase to explain the scope of the system. These designs are built independently, and there is a high probability that their elements can clash or overlap with one another and cause reworks and delays. Here comes the BIM coordination services.
Through BIM software, these designs are integrated and converted into a single design. Which is then presented to all stakeholders to highlight the potential clashes among various elements, such as there may be a chance that HVAC ducts may overlap with plumbing ducts. Presenting these designs in 3D enhances the collaboration among all team members, improves efficiency, enhances the sense of responsibility, reduces misunderstandings and increases sense of accountability among all stakeholders.
Optimize Your Project With Our MEP BIM Coordination Services
Did you know that poor MEP coordination or clashes among MEPs are the reasons for 30% of project failures? Yes, it’s a huge number! To avoid MEP clashes, proper coordination among all stakeholders, clash detection and relevant solutions are essential.
At “BIM Modeling”, we address this issue through our 3D virtual environment. Our team detects the possible issues among mechanical, electrical and plumbing elements, design inconsistencies, and elemental installations at the earliest stages.
It is helpful to start the smooth onsite construction work without any hurdles, overlapping of elements. There will be no interference of one system component with the other. Resolving various disciplines’ conflicts before the construction work starts on site helps save time, reduce cost, enhances profit and delivers on time. So, don’t waste your time on reworks and clashes, get in touch with us right now and get a quote for MEP coordination services.
Why Choose Our BIM Clash Detection Service Providers
Industry knowledge
Our team has years of experience in this field. They can tackle complex clashes easily and spot the issues at first go.
Proficiency in using the latest software
Our team is capable of using the latest BIM software such as Autodesk Revit, Navisworks, AutoCAD, and many others. Their skills to integrate these tools enable them to deliver the finest 3D designs within no time.
Communication Skills
Our professionals convey the clashes to all stakeholders in a very easy way. It makes the discussions very friendly and enables us to make the final decisions with mutual understanding and collaboration.
Adapting Skills
BIM software upgrades regularly. Our team has an adaptive nature to learn new features with dedication so that they can ensure the latest technological integration for your 3D designs.
Efficient Problem Solvers
We not only detect the clashes but also give the solutions. Our team's analytical thinking skills make them proficient in the fastest and efficient solutions.
Ongoing Support
Our experts remain available for you throughout your project. You can contact us at any stage of your project to discuss and get explanations.
Our Workflow for 3D BIM coordination
Collect Data from Stakeholders
The first step is collecting data from stakeholders so that we can review all individual designs and their component placement. Accurate data transfer from the relevant persons is essential at this stage for accurate 3D BIM coordination.
Clash Detection
The next step is using BIM software and creating a central 3D model of all designs, and detecting clashes among different components. We documented each issue and share it with all stakeholders.
Coordination And Customized Solutions
The next step is arranging a meeting with all relevant persons, presenting issues and possible solutions. At this stage, we listen to their suggestions and give our experts ideas to keep the whole team on the same page.
Final Design Approval
After solutions and suggestions, we finally create an error-free central model design that is the basic for the construction work. The final design is error-free and addresses all issues to streamline the project flow without reworks and errors.
What Distinguishes Our BIM Coordination Company?
We have extensive experience of 27 years in serving various sectors and disciplines with BIM services for coordination and clash detection. Our professionals have experience in dealing with contractors, engineers, developers, architects and designers. Our company has a 98% success rate for structural, architectural, interior and MEP clash detection services. It means, BIM reports delivered by our team to various projects are always accurate, and those projects always complete on time, within budget and minimum rework. We are collaborative partners for many renowned real estate firms and government infrastructure projects.
We understand the local regulatory codes of the area and provide designs that align with the standard regulations. Further, our designs get early approvals and are helpful in starting and complete work on time. Unlike other BIM coordination companies, we deliver what we commit. Our commitment to our clients’ success and dedication to serving them with honesty while following all ethical values make us stand out from others. If you are also looking for error-free coordination designs from a communication-friendly team, you must contact us right now.
Outsource BIM Coordination Services to Us
Want seamless coordination among MEP projects? It is not challenging anymore! The professional team of “BIM Modeling” is here to assist you. Share your MEP individual plans and get a 3D central model visualization with all possible clashes and their solutions.
Our Coordinated Models Leeds to precise Planning And Confident Building
If you are a contractor and find it challenging to keep your whole team on the same page, then our Coordinated 3D model with clash detection is for you. You just have to approach us for BIM services and leave the rest to us. Our team analyzes the MEP designs, structural beams, plumbing pipe connections, HVAC components Installations, and electrical conduit fixing points and identifies any overlapping.
Not only this, but we discuss it with the stakeholders and finalize it according to their suggestions to keep them on the same page. You sit back and supervise the projections and proceedings for the project completion. So, leave your coordination and clash detection worries behind and contact us right now for detailed 3D planning.
We Serve in the Following Areas
Whether it’s a developed city of a big state or a remote area of a small state, construction processes occur everywhere. That’s why we provide BIM Coordination and clash detection services countrywide.
- California
- Texas
- Florida
- New York
- Pennsylvania
- Illinois
- Ohio
- Georgia
- North Carolina
- Michigan
- New Jersey
- Virginia
- Washington
- Arizona
- Tennessee
- Massachusetts
- Indiana
- Missouri
- Maryland
- Wisconsin
- Colorado
- Minnesota
- South Carolina
- Alabama
- Louisiana
- Kentucky
- Oregon
- Oklahoma
- Connecticut
- Utah
- Iowa
- Nevada
- Arkansas
- Kansas
- Mississippi
- New Mexico
- Nebraska
- Idaho
- West Virginia
- Hawaii
- New Hampshire
- Maine
- Montana
- Rhode Island
- Delaware
- South Dakota
- North Dakota
- Alaska
- Vermont
- Wyoming
Related Services Pages
Do you need help with the on-site collaboration challenges? No need to worry more. Get our onsite BIM services to build…
Precision drives construction forward, and shop drawings are the heartbeat of that process. Every steel beam, electrical line, and MEP component must be represented…
If you want to achieve consistency and flexibility in your project design, contact our BIM content creation services. We present…